Elecro G2 Titanium Heat Exchangers
£330.00 – £670.00
- Product Literature
- Delivery & Payment
- Additional information
Elecro G2 Titanium Heat Exchangers
Whilst not as efficient to use for pool heating as a heat pump, heat exchangers can be used to heat pool water via a boiler.
The boiler provides hot water to the heat exchanger. Pool water runs alongside the hot water from the boiler and transfers the heat to the pool water.
Heat exchangers can be used as a backup to a heat pump on indoor pools.
They can also be used with domestic type heat pumps that have a higher flow temperature than swimming pool heat pumps.
We recommend the Elecro G2 Titanium heat exchangers as they have excellent performance and build quality
Elecro Multi-Tubular heat exchangers are comprised of a 38-piece Titanium tube bundle, giving a vast surface contact area for the two water circuits.
The primary circuit chamber – through which water from the heating source travels, is very narrow ensuring heat is absorbed and replaced with Hot water quickly.
These strategic design features enable the Elecro heat exchangers to perform very efficiently even when working with low value Primary temperatures, such as Solar heating systems.
The rigid aluminum jacket encapsulating a pocket of air, thermally insulates the entire unit ensuring that heat is transferred within the desired chamber and absorbed by the swimming pool water, rather than lost to the atmosphere.
Titanium Tube Bundles make the Elecro Heat Exchangers ideal for use on Salt Chlorinated pools.
The unique design and robust construction of the Elecro Generation 2 (G2) Heat Exchanger offers an unrivaled heat transfer surface area, making it one of the most efficient products on the market.
Featuring a densely packed tubular bundle in a thermally insulated primary chamber. The relatively small volume of the chamber and large surface area of the internal tubing provides superb heat transfer efficiency and minimal energy loss, making the G2 the perfect choice for all applications including gas or oil fired boiler circuits, solar panels, heat pumps or chillers.
The G2 is manufactured to the highest specification, using the strongest and most durable materials. The shell is constructed from BS 316L stainless steel (EN 1.4432) and enclosed by a rigid thermal casing for enhanced insulation of the primary water flow, ensuring maximum efficiency.
It has been designed to allow the installation engineer to select which way to plumb the primary and secondary water to achieve maximum thermal gain. This is achieved by routing the primary flow in an opposing direction to the secondary (pool) water.
The standard G2 heat exchanger is supplied complete with:
- 2 x 1” male/male brass primary connections
- 1 x 1” non-return valve
- Titanium thermostat pocket
- 1 x Blanking cap & coin gasket (for non-thermostat side)
- Robust, durable construction
- 316 stainless steel shell with special polyamide fittings
- 38 piece titanium internal tube bundle
- For indoor or outdoor pools
- Thermostat pocket
- Solvent weld unions for connection to rigid pipe
- 1.5” connections
- Suitable for salt, chlorinated and solar heated pools
- Available with fully equipped Analogue or Digital control (optional)
- May be floor or wall mounted with the supplied bracket
- BS 316L Stainless Steel shell (EN 1.4432) with special polyamide fittings
- 3-year warranty
3. G2 Titanium heat exchangers are available in:
Our sizing guide for heat exchangers is 10 BTU per gallon of pool water (or 2.9kw per 4.5m3 of pool water)
Please see Specifications tab at the top of the page
Installation is straightforward. We can provide advice on installing your heat exchanger. We can also offer an installation service if required.
Please see our Installation Tips pages for information on how to install your heat pump. Our Photo Gallery also has photograph examples of pool heat pump installations and please also see the FAQ pages for more information
Please contact us for further advice
The range of Elecro heat exchangers are now in stock in the UK and can be shipped to any UK address on a 1 – 3 day delivery service.
The price includes FREE UK delivery.
We can ship the Elecro heat exchangers to any country. Please contact us for a shipping quote.
The Elecro heat exchangers come with a 3-year warranty
9. Technical Support
We are happy to provide technical support for all Elecro heat exchangers that we supply.
10. Product Literature
Please see the Literature tab at the top of the page for the Brochure and User Manual downloads.
If you need any assistance or advice as to which model would be best for your pool, please email us
for more information, also see our FAQs page
All items sold in accordance with our terms and conditions
For all enquiries, please contact us at firstname.lastname@example.org
Please click the links below to download pdf brochures
We accept all major credit and debit cards, Bank Transfer (BACS) and Paypal
For details of PayPal Credit please click here: PayPal Credit
The prices shown include FREE UK delivery for orders over £50 or £6.50 for orders under £50
We can ship to any country. Please contact us for a shipping quote.
The lead time on most items is normally on a 1-2 day delivery, subject to availability. Please call to check availability.
30kw, 49kw, 85kw, 122kw