Heat Pump Mounting Feet and Slab for Swimming Pool Installations

Description

We are pleased to offer our range of heat pump mounting feet

These mounting feet can be used with virtually any heat pump make or model.

They raise the heat pump from the ground to help protect the heat pump from corrosion and to allow the condensate water to escape

They also help to reduce noise and vibration from the heat pump.

We offer:-

1. Mounting feet
2. Slab

1. Mounting Feet and Lightweight Slab Kit assembly

We have two items available:-

1. Flexi Slab Kit (2 x 600mm feet, slab 600 x 1200mm)
2. Slab 600mm x 1200mm

Our mounting feet come with fixings

2. Mounting Feet Only – Flexi Foot Kits

We offer the 600mm mounting feet for heat pump

Our mounting feet include struts and fixings

• Available in four sizes: 250, 400, 600 & 1000 (mm). – please contact us
• Made from heavy duty recycled rubber.
• 21 x 41 (mm) galvanised steel strut is supplied bonded to the rubber.
• Drain slots molded to the underside of the foot.

3. Slab Only – Ultralite Paving Slab

We sell the slab only.

It is a lighweight slab which resembles a paving slab, but is much easier to lift and drill

Made from encapsulated polystyrene core slab reinforced with textured cement coating

Ultralite Paving Slab 1200 x 600mm

Topside

Underside (polystryene in the centre)

Installation

Installation is straight forward.

Bolts are supplied to bolt the heat pump to the mounting feet.

A metal plate slides into the channel and can be moved into position. The bolt then passes through the feet of the heat pump and into the plate and is tightened

The mounting feet then just sit on the slab or paving etc

Assistance?

If you need any assistance or advice please Contact Us

for more information, also see our FAQs page

All items sold in accordance with our terms and conditions

for all enquiries, please contact us at enquiries@heatpumps4pools.com

Additional information