Intex/Bestway Hose Adaptor A for 32/38mm pool hose

Description

We are selling an Bestway/ Intex Hose adaptor A for Intex or Bestway pools

This adaptor screws onto either the inlet/outlet of an Intex pool or onto the inlet/outlet of an Intex Krystal clear pump filter set, (or any filter with a 2″ male thread)

The adaptor then allows either 1.25″ (32mm) or 1.5″ (38mm) hose to be connected

Shown with 38mm (1.5″) Hose

Each adaptor comes with:-

• 1 Plastic Screw Nut
• 1 Plastic stepped hose tail

(does not come with Jubilee clip)

It has a 2″ female grey nut on one end and a stepped hose tail on the other side.

(Note that the internal diameter of the grey nut measures just under 2 1/4″ or 58mm)

For example, it is ideal for use when using our Hot Splash heat pump (which has 1.25″ /32mm connections)

It allows 1.25″ or 1.5″ pool hose to be connected to the pool and also to the pump/filter set.

It can also be used to allow hose to be connected to the backwash outlet of a sand filter

We also sell both 1.5″ and 1.25″ pool hose if you need this.

If you have any questions, please Contact Us

Additional information