Kit 11 Above Ground Swimming Pool Connection Kit

Description

Kit 11 Above Ground Swimming Pool Connection Kit

When installing an above ground pool, you may find it confusing to attach all the different hoses as each pool/pump and filter and heat pump comes with different connections.

At Heatpumps4Pools Ltd we have tried to make this task as easy as possible but there are a few different factors to take into account.

The basic layout should look like the picture below:

We have labelled the 6 connection points so that we can advise where the pieces of the Kit is to be positioned 1-6.

Please see below for this information

1. Description

This kit is ideal for the use with a an above ground pool that has 38mm connections

When a 38mm Intex Krystal Clear Sand Filter with the following Heat Pumps:

1. Q-Line

2. This Kit includes the following:

• 1 x Adaptor A (Connection 3)
• 1 x Adaptor B (Connection 5)
• 1 x 38mm Hose (Use between the Pump and Filter and the Heat Pump – Connections 3 to 4)
• 2 x  Jubilee Clips (Use at each end of the 38mm Hose – Connections 3 to 4)

1 x Adaptor A (Connection 3)	1 x Adaptor B (Connections 5)
1 x 38mm Hose (Use between the Pump and Filter and the Heat Pump – Connections 3 to 4)	2 x  Jubilee Clips (Use at each end of the 38mm Hose – Connections 3 to 4)

For our full sizing guide please click on the following link Above Ground Pipe Connection Guide

If this kit is not available for any reason then you can also use Kit 10.

3. Fitting Guide

*Please note: The Krystal Clear pump and filter set is supplied with 2 x Intex Hoses (with the grey nuts, also 38mm – attach both of these to the pool inlet/outlet). The other end of the hoses are to positioned as follows: the first of these hoses is screwed directly on to the Inlet of the Krystal Clear Pump and Filter, the other will be attached to the heat pump.

1. 1 x Adaptor A (Connection 3)
2. The 1 x Adaptor B can be placed on the Outlet of the Q-Line Heat Pumps – (Connection 5)
3. The 38mm Intex Hose is to be positioned on to the Krystal Clear pump/filter and the other end is to be placed on the Adaptor B on the Heat pump connections. (Between Connections 3 to 4)
4. 2 x  Jubilee Clips (Use at each end of the 38mm Hose – Connections 3 to 4)

4. Availability

We try to hold a large amount of stock of these kits in the UK which can be shipped to any UK address on a 1 – 3 day delivery service.

However sometimes in very busy periods there may be a delay from suppliers on some of the parts needed for these kits – so we will update the website when this  situation occurs.

5. Delivery

Shipping for order under £50 is £6.50, orders over the £50 are free of charge to the UK Mainland.

We can ship the The Above Ground Pipe Connection Kits to any country. Please contact us for a shipping quote.

6. Assistance?

If you need any assistance or advice as to which model would be best for your pool, please email us

for more information, also see our FAQs page

All items sold in accordance with our terms and conditions

For all enquiries, please contact us at enquiries@heatpumps4pools.com

Additional information