Kit 15 Pool Connections for Above Ground Swimming pools

Description

Kit 15 Pool Connections for Above Ground Swimming pools

1. Description

When installing an above ground pool, you may find it confusing to attach all the different hoses as each pool/pump and filter and heat pump comes with different connections.

At Heatpumps4Pools Ltd we have tried to make this task as easy as possible but there are a few different factors to take into account.

The basic layout should look like the picture below:

We have labelled the 6 connection points so that we can advise where the pieces of the Kit is to be positioned 1-6.

Please see below for this information

2. Heat Pumps this can be used with Kit 15 Pool Connections:

This kit is ideal for the use with a an above ground pool that has 38mm connections

When a 38mm iFlo 500 Sand Filter with the following Heat Pumps:

1. Thermotec Inverter With Wi-fi
2. Thermotec Eco Inverter
3. Thermotec Eco Fun

3. The Kit 15 Pool Connections includes the following:

• 2 x Adaptor A (Connections 1 & 6)
• 4 x 38mm Threaded Hosetails (Connections 2,3,4 & 5)
• 7.5m of 38mm Hose i.e 7.5m (Connections 1-2, 3-4, 5-6) which will cover a distance of 3m for the heat pump away from the pool
• 6 x  Jubilee Clips (Use at each end of the 38mm Hose – Connections 1-2, 3-4, 5-6)

2 x Adaptor A (Connections 1 and 6)	1/Use 1 x long piece of hose between the pool and pump and filter – 2 Lengths (Connections 1-2) 2/Use 1 x short piece of hose between the Pump and Filter and the Heat Pump – 1 Lengths (Connections 3-4) 3/Use 1 x long piece of hose between the heat pump and pool – 2 Lengths (Connections 5-6) *Hose can vary as each length comes in either 1.5m/1m lengths
6 x  Jubilee Clips (Use at each end of the 38mm Hose – Connections 1-2, 3-4, 5-6)	4 x 38mm Threaded Hosetails (Connections 2,3,4-5)

For our full sizing guide please click on the following link Above Ground Pipe Connection Guide

4. Kit 15 Pool Connections Fitting Guide

1. 2 x Adaptor A is to be screwed on both the Inlet/Outlet of the Pool (Connections 1 & 6)
2. 4 x 38mm Threaded Hosetails are to be screwed into the heat pump and the Pump/Filter on both the inlet and the outlet connections (Connections 4-5)
3. Place 2 Jubilee Clips on to each length of Hose x 3. (Connections 1-2, 3-4, 5-6)
4. The *3 lengths* 38mm Hose is to be positioned  as follows : Use 1 x long piece of hose between the pool and pump and filter (Connections 1-2),Use 1 x short piece of hose between the Pump and Filter and the Heat Pump (Connections 3-4). Use 1 x long piece of hose between the heat pump and pool (Connections 5-6)
5. The 6 Jubilee Clips are to be tightened on the outside of the Hose accordingly to secure the hose (Connections 1-2, 3-4, 5-6)

*Hose can vary as each length comes in either 1.5m/1m lengths.

5. Availability

We try to hold a large amount of stock of these kits in the UK which can be shipped to any UK address on a 1 – 3 day delivery service.

However sometimes in very busy periods there may be a delay from suppliers on some of the parts needed for these kits – so we will update the website when this  situation occurs.

6. Delivery

The price includes FREE UK delivery.

We can ship to any country. Please contact us for a shipping quote to any non UK address.

These items are in stock in the UK ready for immediate dispatch

7. Assistance?

If you need any assistance or advice as to which model would be best for your pool, please email us

for more information, also see our FAQs page

All items sold in accordance with our terms and conditions

For all enquiries, please contact us at enquiries@heatpumps4pools.com

Additional information