Description

Nano Titanium Electric Heaters Elecro Pools and Spa Heaters 1-6kw models (2+3kw Pool models are Plug and Play models).

The Nano electric pool/spa heater has an output of 1 to 6kw

As it is an electric heater, for every 1kw it consumes of power it will  deliver 1kw of pool heat into the water.

A heat pump will offer much lower running costs. If you are interested in a pool heat pump for your above ground pool, please see our SunSpring range of pool heat pumps

2. Features

• Titanium heating element
• Ideal for above ground pools and Spa’s
• Thermal safety cut-out (manual reset)
• 2m power cord
• 230v, up to 18A load, single phase
• Flow Switch – no pump interlock required
• Fully pre-wired, easy installation
• Plug and play
• comes with a range of water connections including
• 1.5″ female threaded
• 50mm plain female socket unions
• 1.5″ plain female socket unions
• 1.5″ / 1.25″ hosetail connectors

3. Sizing

The guide for sizing electric pool heaters is 1.5kw per 1000 gallons of pool or pond water. Or 1.5kw per 4.5m3 of pool water

Please use the chart below to select the best SunSpring heat pump model for your pool

The largest size a 6kw electric heater will support is 18m3 maximum pool volume

For example: a 20m3 pool, you would need at least a 6.6kw electric heater.

Note that the maximum size of electric heater that can run from a UK 13A socket is 3kw, so the 4kw, 5kw and 6kw need hard wiring. All Spa models do not come with a plug so will need hard wiring.

Our Sunspring heat pumps output up to 10kw of pool heat from only 1.7kw of electricity and so have much lower running costs than electric pool heaters and they can plug into  a standard 13A power socket.

5. Installation

Installation on the 2+3kw Pool models is straight forward as the unit comes with a 13 amp plug which can be plugged directly into the mains socket, the Spa models need hard wiring into the mains. It comes with the water connections needed.

If you need further assistance please call us on the number below.

The flow rate of water into the heater must not exceed 17,000 litres per hour (17m3/hour/3,740 UK gallons
per hour). A higher flow rate will require the installation of a by–pass to prevent damage to the heater
elements.

NOTE: The heater will not operate unless the following minimum flow rates are achieved:
1,000 litres/hour (1m3/hour / 220 UK gallons/hour).

6. Availability

This range of Nano Electric pool heaters are now in stock in the UK and can be shipped to any UK address on a 1 – 3 day delivery service.

7. Delivery

The price includes FREE UK delivery.

We can ship the Nano Electric Heaters to any country. Please contact us for a shipping quote.

8. Warranty

The Nano electric heater comes with a 2-year warranty

The warranty will not apply where the electric heater has been installed incorrectly, or has been damaged by freezing

9. Technical Support

We are happy to provide technical support for all Nano swimming pool heaters that we supply.

10. Product Literature

Please click the links below to download pdf brochures

Nano Electric Pool Heater User Manual

Nano 3kw Electric Pool Heater Leaflet

Please also see the Literature tab at the top of the page for the Brochure and User Manual downloads.

11. Assistance?

If you need any assistance or advice as to which model would be best for your pool, please feel free to call or Contact Us

for more information, also see our FAQs page

All items sold in accordance with our terms and conditions

for all enquiries, please contact us at enquiries@heatpumps4pools.com

Please click the links below to download pdf brochures

Nano Electric Pool Heater User Manual

Nano 3kw Electric Pool Heater Leaflet

Please also see the Literature tab at the top of the page for the Brochure and User Manual downloads.

Additional information