Thermotec Ice Bath and X-Ice Chiller Bundle

Thermotec Inverter Edge Heat Pumps for Swimming Pools 9kw – 40kw.

 Please call us if you need any assistance to select the best size and type of pool heat pump.

1. Description of the Thermotec Inverter Edge Heat Pumps

The Thermotec Inverter Edge range of pool heat pumps offer an excellent inverter driven heat pump at a low cost with high value for money..  HeatPumps4Pools are the leading specialist supplier of swimming pool heat pumps. We have many years of experience in the market and have used our expertise to research and design our own range of Thermotec swimming pool heat pumps.

The Thermotec Inverter Edge range are fully inverter driven. This means that they automatically adjust the speed of the fan and compressor to precisely match the heat demand from the pool.

The ability to adjust the output of the pool heat pump allows the Thermotec Inverter Edge to deliver greatly reduced running costs with COPs of up to 12.5. This means that for every 1kw of electricity used by the heat pump, 12.5kw of heat is delivered to the pool. This delivers reduced running costs compared with other heat pumps on the market

In addition the inverter technology has a reduced electrical startup requirement, making them ideal for properties with a sensitive or limited electrical supply.

2. Features of the Thermotec Inverter Edgeb Heat Pumps

• Fully inverter driven with variable speed fan and compressor to deliver the lowest running costs with maximum heat output
• High efficiency with COPs of up to 12.5. This means that for every 1kw of electricity used by the heat pump, up to 12.5kw of heat is returned to the pool.
• Equipped with an easy to use touch screen display / control panel.
• Top quality Mitsubishi variable speed inverter compressor
• Brushless variable speed DC fan motor – very efficient with extremely quiet operation
• Control panel is lockable to prevent tampering with the pool set temperature (useful for rented properties)
• Five different models: 7kw, 9kw, 12kw, 16kw, 19kw
• All models use single phase power (ie 220v to 240v)
• Provides cooling and heating of pool water
• Suitable for pools, swim spas, hot tubs and koi ponds etc
• Soft start with reduced electrical startup requirements for properties with sensitive or limited power supplies
• Low noise, variable speed fan.
• Corrosion resistant case
• Microprocessor controlled
• Automatic hot gas defrosting.
• Built in timer and clock
• Set Temperatures for this model are 10-43 degrees
• Silent mode
• Titanium heat exchanger – resistant to corrosion from chlorine or salt pools.
• Operates in air temperatures as low as -7 °C.
• 2-Year Warranty
• Note: these heat pumps do not come with a power cable or plug. The require a heavy duty piece of round flex cable with a 13A UK plug on the end. Please purchase the plug and play cable kit to make this in to a plug and play heat pump
  
• The Inverter Edge 7kw, 9kw and 12kw can be run from a standard 13A UK Plug, larger models need to be hardwired as they can exceed 13A
• Note: These heat pumps come with 50mm Unions for the use with 1.5″ Solid pipework – with this you will need to purchase 2 x 50mm to 1.5″ Adaptors plus a bottle of glue as listed on the optional extras.
• For above ground pools please choose 2 x 1.5″ Threaded Hosetail’s and 2 x Jubliee clips which are available on the listing as an optional extra. This will allow you to connect 32mm/38mm flexi hose.
  
• Suitable for inground or above ground pools

3a. What size Thermotec Inverter Edge Heat Pump do I require for my pool?

The sizing guide for a covered pool is:-

4. COP And Performance of the Thermotec Inverter Edge Heat Pumps

By using the latest inverter technology, the Thermotec Inverter Edge can out perform traditional on/off type heat pumps as well as many other inverter driven models.

Even as the outside air temperature falls, the Thermotec Inverter Edge will still perform well, delivering heat to your pool.

The Thermotec Inverter Edge heat pumps can work well with outside air temperatures as low as -7c

The COP (Coefficient of Performance) is the ratio of the amount of heat (in kw) that the heat pump delivers to your pool compared to the electricity that the heat pump uses (in kw)

By using the latest inverter technology, the Thermotec Inverter has COPs up to 12.5. This means that in these conditions, 1kw of electricity consumed by the heat pump will output 12.5kw of heat to your pool !

5. Extremely Quiet Operation on the Thermotec Inverter Edge Heat Pumps

The Thermotec Inverter Edge range work very silently thanks to a unique internal ventilation system and the inverter technology.

Both the fan and compressor automatically adjust their speed to match the pool heat demand, therefore once the pool is up to temperature, the unit can operate with reduced power consumption and noise.

6. Controls on the Thermotec Inverter Edge Heat Pumps

The Thermotec Inverter Edge display will show:-

• The current pool water temperature
• The mode (e.g. heating or cooling)
• Clock/time
• If the timer function has been set
• If the fan is operating
• The current time and date
• The outside ambient temperature
• If there is a fault, a fault code is displayed to explain the problem
• There is a protective flap over the display to protect it from the weather and UV rays from the sun
• Inlet water temperature
• Outlet water temperature

7. Specifications of the Thermotec Inverter Edge Heat Pumps

Unit Net Dimensions

Please also see the Specifications tab at the top of the page

8. Electrical Requirements on the Thermotec Inverter Edge Heat Pumps

9. Mounting Feet Included with the Thermotec Inverter Edge Heat Pumps

The Thermotec Inverter Edge horizontal range of heat pumps come with:-

• 2 x Water connection unions (with 50mm glue socket outlets – 1.5″ adaptor bushes available as an option)
• 4 x Rubber mounting feet (heavy duty mounting blocks available as an option – see below)

10. Water Connections

These heat pumps come with grey 50mm unions which you will use with 2 x 50mm/1.5″ Adaptor bushes if you wish to use 1.5″solid pipe and glue

If you wish to connect flexible hose to the heat pump for above ground pools, then please also purchase: 2 x 1.5″ Threaded Hosetail’s and 2 x Jubliee clips which are available on the listing as an optional extra.

Please call us if you are unsure which fittings you need

11.Optional Extras:

Heavy Duty Mounting Feet		These heat pumps come with rubber mounting feet (see photo above). Alternatively you can purchase these heavy duty Mounting Feet. These raise the unit off the ground by approximately 100mm, and also help to reduce vibration. Please see our Mounting Feet and Slabs section for more information.
Bypass Kit		Please see our Bypass Kits section section for more information.
Winter Cover		We offer a heavy duty cover which will give you added and extended protection against the winter weather Please see our Winter Cover section section for more information.
Plug and Play Cable Kit		We offer a plug and play cable kit, this allows the heat pump to be plugged into a standard 13A outdoor socket Suitable for heat pumps with an input power up to 3kw or 13A Please see our Plug & Play Cable Kit section for more information.

12. Installation of the Thermotec Inverter Edge Heat Pumps

Installation is straightforward. We can provide advice on installing your heat pump. We can also offer an installation service if required.

We recommend that a bypass is installed to allow the heat pump to be drained in winter if not in use. We sell bypass kits if required.

Please see our Installation Tips pages for information on how to install your heat pump. Our Photo Gallery also has photograph examples of pool heat pump installations and please also see the FAQ pages for more information

Please contact us for further advice

13. Availability

The range of Thermotec Inverter Edge pool heat pumps can be shipped to any UK address on a 3 day delivery service when in stock. Please check the listing above to see if the model you require is in stock.

You can pre-order from the next shipment arriving as we have regular deliveries, or pay a deposit to reserve a unit – please call us to take advantage of this option.

14. Delivery

The price includes FREE UK delivery.

15. Warranty on the Thermotec Inverter Edge Heat Pumps

The Thermotec Inverter Edge heat pumps come with a 2-year warranty on all components and 5-year warranty on the compressor and heat exchanger:-

• 2-year parts and labour warranty on all components
• 5-year warranty on the compressor and heat exchanger
• Europe and Outside the UK: Warranty is parts only warranty or return to us in the UK (customer pays transport cost). If spare parts are required, they will be sent free of charge to a UK address. If they are to be shipped outside the UK, the customer pays the international shipping cost

We recommend that you retain the pallet and packaging that the heat pump was delivered with in case you need to return the unit to us for repairs under the warranty.

The warranty will not apply where the heat pump has been installed incorrectly, or has been damaged by freezing

16. Technical Support

We are happy to provide technical support for all Thermotec Inverter swimming pool heat pumps that we supply.

We hold spare parts to support all Thermotec Inverter Edge heat pumps both during and after the warranty period

17. Product Literature

Please see the Literature tab at the top of the page for the Brochure and User Manual downloads.

18. Assistance?

If you need any assistance or advice as to which model would be best for your pool, please email us

for more information, also see our FAQs page

All items sold in accordance with our terms and conditions

For all enquiries, please contact us at enquiries@heatpumps4pools.com